Dual 8 Vinyl Racing Stripe 17 No Scoop Fits Chevy Camaro 2010 to 2015

Dual 8" Vinyl Racing Stripe [17"] [No Scoop] - Fits Chevy Camaro 2010 to 2015. What's in the Box: (1) x Complete set of Dual 8" Racing Stripes Kit with 1" Separations [Total Width 17] (1) x Hood Stripe (1) x Trunk-Rear Bumper Stripes (1) x Roof Stripe (1) x Front Bumper Stripe (1) x Front Skirt Stripe (1) x Spoiler Stripe (1) x Squeegee with Felt Premium Cast Vinyl Material (Oracal #651) Installation Guide Modular Design: This kit is pre-cut in different sections of the car and can be easily adjusted to your personal preference. You may choose to run the stripes all the way to the bottom of the car or stop sooner.

This kit's modular design allows you to do this without any extra effort. Fitment: These kits are designed with pre-cut sections for each body panel.

Minor trimming of excess material may be required. All sections come with excess vinyl to account for vehicle body curves What do I need?

Spray Bottle w/ Dish Soap and Water Mixture Pair of scissors Sharp Razer Blade/Knife Painter's Tape How to Install your decal: This kit requires a moderate amount of knowledge in regards to installing decals. This is very important if using the dry method which is the preferred method of professionals. However, that method is much harder to perfect.

We recommend for DIY customers to use the wet method as you can slide the material around during the installation. This method does take longer due to the time needed for the water soap solution to dry prior to removing the application tape.

Please follow the instructions provided as Fusion Decals will not be responsible for improper installation. Series 651 Features: This vinyl is for Permanent use, however with mild heat and technique this vinyl can be removed fairly easily if not overheated. (Goo-gone recommended) Calendared 2.5-mil PVC Gloss finish is thermal-transfer compatible Solvent acrylic permanent adhesive Designed for short-term and medium-term outdoor applications such as corrugated signs, economy banners and flat- surface applications 100% splice-free rolls, every time 6 year outdoor durability. What's in the Box. (1) x Complete set of Dual 8" Racing Stripes Kit with 1" Separations [Total Width 17] (1) x Hood Stripe (1) x Trunk-Rear Bumper Stripes (1) x Roof Stripe (1) x Front Bumper Stripe (1) x Front Skirt Stripe (1) x Spoiler Stripe (1) x Squeegee with Felt Premium Cast Vinyl Material (Oracal #651) Installation Guide.

This kit is pre-cut in different sections of the car and can be easily adjusted to your personal preference. These kits are designed with pre-cut sections for each body panel.

All sections come with excess vinyl to account for vehicle body curves. Spray Bottle w/ Dish Soap and Water Mixture Pair of scissors Sharp Razer Blade/Knife Painter's Tape. How to Install your decal. This kit requires a moderate amount of knowledge in regards to installing decals.

This vinyl is for Permanent use, however with mild heat and technique this vinyl can be removed fairly easily if not overheated. Sorry, our items are NOT available for pick-up. No additional information at this time. 20.5" Racing Stripe w/Pins 26.5" Total - Compatible with/Replacement for - Ford.

20" Racing Stripe w/Pins [24"]- Compatible with/Replacement for - Ford Mustang S. 20" Wide Racing Stripe w/Pins 24" Total - Compatible with/Replacement for - Ford.

20.5 Wide Racing Stripe Kit - Compatible with/Replacement for - Ford Mustang 20.